• Motorola Dch3200 Hdmi

This helpful, if disclaimer-rich, is uncharacteristically open about the option to hack your Motorola DVR and get the video from it to a PC.but some people on their own have devised a way to access digital recordings on the DCT6208 or DCT6412 and offload them to a PC hard drive or Digital High Def VCR. Here's how to transfer non-copy protected recordings via IEEE1394/Firewire.

Hi - When connecting my Motorola Cable Box to my Samsung HDTV via HDMI, the picture shows for a second or two and then goes green. The Audio works. DCH3200 manual, comcast, remote code, hack. DCH6416 hack HDTV Recorders Question Motorola Dcx3400 Hack - PDF eBook Download I have the motorola 6412 HD/DVR box with.

I wish all manufacturers were so open an honest about the hackability of their products. The DCT6412 (or is it the 6408?), by the way, is the DVR that Eastlink offers here in Prince Edward Island for $14.95/month.

. IN STALLAT ION MANUA L DCH3200 Installation Manual. IMPORTANT SAFETY INSTRUCTIONS. Read these instructions.

Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by Motorola for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC DECLARATION OF CONFORMITY Motorola Inc., Connected Home Solutions, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares that the DCH3200 receiver complies with 47 CFR Parts 2 and 15 of the FCC rules as a Class B digital device.

CANADA INDUSTRY CANADA (IC) This Class B digital device complies with Canadian ICES-003. CONTENTS 1 Introduction.1 Features. 2 Tuners.2 Standard Audio/Video Features.2 Standard Data Features.2 Standard Miscellaneous Features.3 If You Need Help.3 Calling for Repairs.3 2 Overview.5 Front Panel.5 Front Panel Format Button. Figure 3-3 Cabling to a Standard-Definition stereo TV.14 Figure 3-4 Cabling an audio receiver.15 Figure 3-5 Sample data devices you can connect to the DCH3200.16 Figure 4-1 Example of the front panel display for the diagnostic main menu. 21 Figure 4-2 Example General Status display (no error).

CONTENTS Tables Table 2-1 Front panel.5 Table 2-2 Rear panel connections.7 Table 3-1 Operational check procedures. Ethernet and Universal Serial Bus (USB) 2.0 ports for future home networking applications. Adaptability to various software platforms As with all Motorola digital cable receivers, the hardware features are enabled by core operating and third party application software. Figure 1-1 Front and rear views. 1 INTRODUCTION Features Tuners. One 54 to 864 MHz video tuner with digital MPEG-2 Main Profile @ High Level (High-Definition) video processor. One dedicated tuner for the DOCSIS high-speed data/voice services channel, up to 860 MHz.

One dedicated tuner for the out-of-band (OOB) control channel Standard Audio/Video Features. Motorola Online: The TRC is on call 24 hours a day, 7 days a week. In addition, Motorola Online offers a searchable solutions database, technical documentation, and low-priority issue creation and tracking. For specific toll-free numbers when calling from outside the United States, please refer to your product manual or our Web page.The availability of certain features is dependent upon application support. Front Panel Format Button The Format button.

located on the front panel of the DCH3200 allows you to quickly change the video output format on the Component Video (YPbPr) and HDMI outputs of the product. DCH3200 to operate with your specific television. If you cannot get a video display when the DCH3200 is connected to your television via Component Video or HDMI cables, use the Format button to select a video output format that results in a viewable picture on the display screen. 2 OVERVIEW Rear Panel The rear panel contains an unswitched power outlet; connectors for video, audio, and RF cabling; data output; and modem and data interface connectors. Some connectors are not enabled and require the support of application software. Figure 2-2 Rear panel S VIDEO CABLE IN UNSWITCHED. Video SDTV only If your TV does not have an S-Video input, use the composite video (video) (composite) output.

SDTV only If your TV only has a coaxial RF input, connect it to the DCH3200 RF out connector. AUDIO L and R outputs to connect to the audio receiver. Connect the stereo audio cable to the AUDIO L and R connectors on the DCH3200 and the audio left and right connectors on the TV. If the equipment supports it, use the optical SPDIF or coaxial digital SPDIF output instead of the AUDIO L and R outputs.

3 INSTALLATION. Otherwise, use the baseband left and right audio out outputs. Locate the cabling diagram(s) that best match the subscriber’s configuration. Connect the audio and video cables in a manner matching that diagram. Determine if you are connecting to a data device (see Data Device Connections this section). For the best possible HDTV video quality:.

If the TV has an HDMI input, connect it to the DCH3200 HDMI output. If the TV has a DVI input, you can connect it to the DCH3200 HDMI output using and HDMI-to- DVI converter cable or adapter.

The baseband connections are not necessary because the digital audio port provides a single audio interface for digital channels. Note: If the A/V receiver includes HDMI inputs & output(s) then the DCH3200 HDMI output can be directly connected to the A/V receiver. 3 INSTALLATION Cabling to a Standard-Definition TV and an A/V Receiver Figure 3-3 Cabling to a Standard-Definition stereo TV Because some entertainment equipment cannot simultaneously support baseband composite video and S-Video, never simultaneously connect both video inputs. This connection method does not support HDTV.

For information, see Cabling to an HDTV for Video in this section. 3 INSTALLATION Cabling to a Standard-Definition TV and Audio Receiver To connect to an audio receiver, such as a home mini system, use a daisy-chain cabling connection. The A/V configuration illustrated below enables digital stereo recording, including Dolby Surround sound. Use only one set of composite input connectors on the audio receiver: Figure 3-4 Cabling an audio receiver The video connections shown in this illustration do not support HDTV.

3 INSTALLATION Data Device Connections The DCH3200 provides optional high-speed data services such as Internet access, USB, Ethernet, and more. The functionality of each data device port requires, and depends on, installed application software. The DCH3200 rear panel provides the following data ports: USB 2.0. Feature Testing Procedure Power on Press POWER on the remote control to turn on the DCH3200. Tune to the output channel (3 or 4) if using the RF output.

Channel selection Scan through the channels using the CHANNEL + or - keys. 3 INSTALLATION 2.

Use the remote control or the cursor keys on the front panel to navigate the on-screen menus:. Press the ▲ and ▼ keys to highlight the setting you wish to change. Press the ► key to select an option. 3 INSTALLATION Setting Description HDMI/YPbPr Allows you to specify the video output format of the DCH receiver for all content Output (when the 4:3 override setting is Off) or for all 480p, 720p, and 1080i content (when the 4:3 override is used). Options include 1080i, 720p, 480p, and 480i. By default, the 1080i option is selected. To exit the menu and save your settings, press the power or menu key.

Graphics Overlaying the Video The DCH3200 can generate graphics that overlay the video programming or fill the entire television screen. Common examples include on-screen menus (such as the User Setting menu), closed captions, and IPG. All sample displays are illustrative; actual data may differ from the examples. Using the Diagnostics To use the diagnostics: 1.

Ensure that the DCH3200 is installed with the Thin Client software and that it is connected to an AC outlet. Press and immediately press to enable diagnostic mode.

4 DIAGNOSTICS General Status This diagnostic displays system status information on the OSD and front panel. The information is updated each time the diagnostic is displayed. Figure 4-2 Example General Status display (no error) Environment code Error code. EP15 TSI structure corrupt EP18 Driver initialization failure Connected A DCH-operations connect or disconnect message determines whether the DCH3200 State is CONNECTED or DISCONNECTED. Platform ID A unique 16-bit hexadecimal number that identifies the platform image (also called the ROM ID). The last acknowledged sequence number of a purchase sent by the controller. It is a 16-bit, unsigned hexadecimal number.

Last RB Time The last time the DCH3200 attempted to report back purchases to the controller, in GPS seconds. IPPV Status If IPPV is enabled, the IPPV status indicator is on.

4 DIAGNOSTICS Field Description Purchase request sent by the controller. Poll Request Sequence number and time of the last send poll buffer command that was sent by the controller.

Poll Sequence number and time of the last Poll Acknowledge message sent by the Acknowledge controller. When carrier lock has been established, displays an estimate of the AGC as a percentage, with an explanation: GOOD — Good value FAIR — Marginal signal level, check the signal POOR — Unusable signal INVALID — Invalid AGC value Displays the conditional access stream for the DCH3200, in hexadecimal Provider ID. Displays the packet identifier (PID) stream the DCH3200 tunes to for EMM data, in hexadecimal Network Displays the network PID to which the DCH3200 is tuned to receive network messages, in hexadecimal Hunt Mode The hunt mode includes Hunted, None, Round Robin (RR), Search (SRCH), Fixed Frequency (FIX), or EMM Provider ID (EMM).

4 DIAGNOSTICS 4. If the frequency is found with the proper EMM Provider ID, then the Front Panel will display the normal OOB receiver status. The OSD “LKC” field will change to display the new frequency. If after 40 seconds the frequency search is not successful, the product will perform a warm reset. 5 Second Error Counts Indicates the number of correctable and uncorrectable digital multiplex errors, up to 9999.

It is updated every 5 seconds and reset each time the DCH3200 is power cycled or another digital multiplex is tuned. The maximum value displayed. 4 DIAGNOSTICS Unit Address This diagnostic displays the unit address of the CableCARD if inserted: Figure 4-6 Front panel display of a unit address. The Unit Address fields are: Field Description TvPC Indicates whether the TvPC renewable security system is installed: Installed NO—TvPC is not installed (Note: the DCH3200 does not include a TvPC slot) CableCARD YES—CableCARD is inserted Inserted NO—CableCARD is not inserted Unit A unique decimal number that indicates the unit address or physical address. 4 DIAGNOSTICS Separable Security This diagnostic displays information on the inserted M-CARD and CableCARD Interface with the DCH.

Field Description CARD Interface CableCARD Interface is a status indication of the interface between the Host and CableCARD. It will indicate ‘Good’ if no errors are detected, ‘Error’ if there is an error establishing the CableCARD interface, or ‘Unsupported CARD’. 4 DIAGNOSTICS Field Description Object Name Code object name executing on the CableCARD. Code object version executing on the CableCARD. Manufacturer CableCARD manufacturer. HW Version Version number provided by the CableCARD.

4 DIAGNOSTICS Current Channel Status This diagnostic displays a status of the last attempted tuned channel on the in-band stream. The channel type determines the status display.

(Digital channels only) The center RF carrier frequency for the digital service. It can be Frequency from 54 to 860 MHz. Authorized Indicates whether the DCH3200 is authorized for the currently tuned service: YES — authorized NO — not authorized Purchasable.

4 DIAGNOSTICS Field Description PCR Lock Indicates whether the in-band receiver is locked to the program clock reference (PCR): YES — locked NO — not locked The copy control information: 00 — copy free 01 — no more copies 10 — copy once 11 —. 4 DIAGNOSTICS RF Modem (Upstream) This diagnostic displays the RF modem status, if an RF modem is installed in the DCH3200. The information is updated each time this diagnostic is displayed. Center The RF modem center frequency is displayed on the OSD and front panel in MHz. Frequency Requested The value in dB assigned to the DCH3200 during RF leveling (blank if it is not Power Level configured).

Actual Power The power level is displayed in dB on the OSD and front panel or is blank if the Level power level has not been set. Code Modules This diagnostic includes information about the firmware loaded in flash memory and all non-volatile code versions are installed on the DCH3200. When the native suite is running, the diagnostics of the application operating system and all associated objects. 4 DIAGNOSTICS Figure 4-9 Front panel display for code modules Download data received indicator Download status Number of segments remaining for download to complete. (Figure reflects 17012 segments remaining) Code module identifier (bPC for the base platform; CODE or SYS for the system object) Alternating with Indicator separating major and. The analog secure processor version in ASCII format Secure Processor Downloadable Lists all objects loaded, or being loaded, onto the DCH3200 in ASCII format. The Object information displayed for each object depends on the running environment.

If a Information download is not in progress, the front panel displays the currently running environment Table and version number, as shown in Figure 4-9. 4 DIAGNOSTICS Memory Configuration This diagnostic displays the DCH3200 memory configuration.

Motorola Dch3200 Hdmi

The information is updated when you display the diagnostic. There is no LED display for this diagnostic. The Memory Configuration fields are: Field Description System RAM The allocated system RAM in MB. 4 DIAGNOSTICS AUDIO SPDIF Indicates SPDIF Mode as set by application software.